1. Make a simple support frame for recycling the old belt above the new belt in front of the conveyor head, install the traction device on the conveyor head, disconnect the old belt from the conveyor head when changing the belt, connect one end of the old and new belt, connect the other end of the old belt with the traction device, complete the new belt laying and pulling out the old belt through the traction device, and finally complete the connection of the new belt.
II. A simplex support frame ad redivivus senex balteus factum est et extruxerat in novo TRADUCTOR balteus post caudam cylindro, et tractu fabrica est installed ad ceram distantiam a TRACTIONOR cauda ad cylindro. Cum mutantur in balteus, disconnect et vetus balteus a cauda de TRADUCTOR, coniungere unum finem novae balteus cum uno fine ad vetus balteus, coniungere in aliam finem ad vetus balteus et trahens de vetere ad novam cingulum et trahens de vetere ad novam cingulum et trahens de vetere ad novam cingulum et trahens ex vetus balteus in tractu fabrica et perficere novam et tractu fabrica. Postremo perficere nexum novi tape.
3. Make and install a set of simple guide Angle device on the middle frame of the conveyor, install the traction device at a certain distance from the tail to the roller, disconnect the old belt from the tail when changing the belt, connect one end of the old belt with the traction device and pull out from under the conveyor, and connect the new belt with a lead when the other end of the old belt is pulled to the simple guide Angle device. Novum balteus est et posuit et vetus balteus est extraxerunt a tractu fabrica, postremo novam balteum pertinet.
4. Install the traction device in the middle section of the conveyor, install a set of simple guide Angle device in the middle frame of entering the new belt and leaving the old belt, disconnect the old belt from the middle frame belt of the conveyor (or lower belt) when changing the belt, and then connect one end of the old belt with the traction device, and complete the new belt laying belt and pulling out the old belt through the traction device, and finally complete the connection of the new conveyor belt.
Post tempus: Nov, 13-2023